Can you use speedfit for central heating

Can I Use SPEEDFIT For Central Heating? Yes these plastic fittings can be used to join to new or existing copper pipework (not chromed pipe though), they are suitable for use on central heating as well as domestic water plumbing.

Is JG Speedfit OK for central heating?

JG Speedfit is a push-fit system suitable for the plumbing of domestic hot and cold water services and central heating applications, including pressurised and combi systems. … Extensive tests have shown that Speedfit products will withstand temperatures and pressures well in excess of normal working conditions.

Can you run central heating pipes in plastic?

Plastic pipe systems are available in a wide variety of materials. … These pipe systems can be used in hot and cold water supply and central heating installations; in fact in most areas where traditional piping materials are used.

Can you use speedfit for radiators?

Speedfit can be used on central heating and /should withstand the heat. Many products will also state if suitable for CH and/or cold water. Don’t forget inserts on plastic pipe!

What is the best pipe for central heating?

Copper and Plastic pipes can be combined, so you get the best of both worlds. Using Copper Pipe in places best for Copper and using Plastic pipe in places more suited to plastic. Let’s use a new central heating installation as an example. We will use copper pipe to connect to your boiler and radiators.

Can I use 10mm pipe for central heating?

8mm-10mm pipes can’t do everything This is because small volume pipes end up carrying less water around your system but at a higher pressure. … They may have been just about good enough with the initial heating system.

Can you use push fit on heating systems?

Push fit fittings and pipes, like copper, can safely withstand heat and pressure so they’re suitable for water and heating systems. Many joints are pressure tested to standards in excess of those usually required in domestic situations – 10 bar (100 psi) is common.

How long do Speedfit fittings last?

When it comes to product confidence, John Guest has always built its push-fit pipes and fittings to perform for a lifetime. Now, the UK manufacturer is happy to offer double the reassurance, doubling the guarantee on Speedfit plumbing ranges from 25 years to 50 years.

Can I use copper push fit for central heating?

If you don’t fancy using compression fittings, it is ok to use copper pushfit with heating, or even normal Speedfit couplings.

Can you use Speedfit fittings on copper pipe?

We would always recommend you use Speedfit Fittings with Speedfit Pipe. Other pipe and fittings that have been manufactured to BS7291 can be used with Speedfit products. If using other brands of pipe, ensure you use the correct pipe insert for that brand. Speedfit fittings can also be used with copper pipe.

Article first time published on

Is speedfit better than copper?

Speedfit is fine, the flow rates are good in plastic, better than copper size for size. If you are worried about flow look closely at the taps and valves you will be using.

Can I use plastic pipe instead of copper?

Plastic plumbing hasn’t been in use for as long as traditional copper pipes so there’s no definitive answer as to which material will last longer. We do know that plastic is less corrosive than metal-based plumbing so it may depend on individual plumbing configurations as to which will last longer for you.

Should plastic central heating pipes be insulated?

Plastic pipes supplying hot and cold water or central heating should be insulated against unwanted heat loss and/or freezing. Plastic pipes should be insulated to the same standard as required for copper pipes in the same location.

Can I use flexible pipe for central heating?

The use of flexible hoses within central heating systems is only suitable where necessary providing the hose itself is suitable to deal with the maximum temperature and pressure within the system. It must also be suitable to be used with inhibitor within the sealed system.

Is plastic pipe better than copper?

OVERALL, Copper pipes have a long-standing history of working well in homes. More popularized than other metals thanks to its softer material and flexibility, copper pipes are slightly more resistant to water corrosion than other metallic pipes and generally is durable for the long-term whereas plastic pipes are not.

Can you connect radiator with plastic pipe?

You can simply bring the plastic up and connect straight into the compression fitting of the rad valve. If you decide this route, remember to use the special pipe inserts which are different to the push fit type. It is best though to use copper where any pipework will be visible.

Can speedfit be used for hot water?

Yes you can use speedfit of heating. hot water or cold water. Use the barrier version though. No difference between coils or lengths other than straight lengths are easier to work with and you will need a lot more fittings, which you don’t want in screed floors.

Are plastic push fittings reliable?

Push-fit plumbing systems are reliable and do not deskill with plumbing. But as with any profession, it depends on the product that is used. Different products bring different standards of quality, whether that is the testing it is put under, how it is manufactured or its durability.

Can I use push fit on mains?

Connecting water to the mains MDPE is the most common material used for robust, heavy-duty requirements, making our MDPE push fit fittings perfect for underground trenches and connecting mains water supplies to homes.

How far can you run 10mm pipe to a radiator?

i would not run 10mm longer than 5m, this will give you 10m in total flow and return length. Most plastic manufactures state around that length for 10mm. and any rad above 2.5kw i would go to 15mm.

Can you use flexi pipes on radiators?

Under no circumstances should you connect a radiator with flex hoses, they are not designed for this application, if you need a simple fit buy push fit radiator valve tails (chrome elbows) for your TRV4.

Can you oversize a radiator?

Rule-of-thumb methods often oversize the radiator so as to make sure there are no complaints that the space stays cold, but what no-one ever tells you is that a grossly oversized radiator can cause other problems within the system.

Are Compression Fittings OK for central heating?

Hi Compression fitting will be fine. Trades men often use them especially when a little water is present.

Can you use push fit fittings under floorboards?

Regardless of type of pipe material it is always better to have any joint or fixing accessible if possible. The only type of joint that most plumbers would trust under the floor would be a soldered joint and even then only after it was tested.

Which is better solder or compression fitting?

Compression fittings are not nearly as robust as soldered fittings making them much more sensitive to powerful stresses. They are not ideal for applications where they could be potentially exposed to lots of flexing, bending and excessive vibration or tube movement.

Can you reuse speedfit?

With Speedfit Stop Ends there is no need for tools, sweating or threading. They can be used with plastic or copper pipe, and are reusable many times over.

Can I use push-fit for shower?

Hi – the compression fitting on the shower is so that you can disconnect it if you need to take the shower out. The pushfit connectors are suitable for diy use and rely on a grab ring. If they come out – boy do they come out. Both soldered and compression fittings if fitted properly are guaranteed to last.

Do push-fit fittings leak?

When leaks do happen, it’s almost always because of one, or a combination of the following: The pipe isn’t cut properly. The insert isn’t pushed all the way in. The pipe isn’t fully connected to the fitting.

Can you mix plastic and copper plumbing?

Interestingly you can join copper and plastic with a lot of the same fittings; a lot of people don’t realise you can join a bit of plastic pipe with a compression fitting. … Once you’ve inserted the liner the nut goes over the end of the pipe followed by the copper olive and then the fitting itself.

How close can a plastic pipe be to a boiler?

Plastic pipework is allowed to be used on oil boilers, provided there is at least 1000mm copper pipe connection to the boiler before any plastic. Plastic pipework may also be used on under floor heating systems in conjunction with a blending valve.

Can you mix hep2o and speedfit?

They ALL have the same OD but slightly different ID’s so the fittings are all suitable for each other but you must use the correct inserts for each type of pipe.