Do you need primer with Christys Red Hot Blue Glue

Red Hot Blue Glue® does not require the use of a primer, unless specified by local code. APPLICATIONS Red Hot Blue Glue® is for use on rigid and flexible PVC plastic pipe and fittings. Approved for pressure and non-pressure, potable and non-potable, water

Can you use PVC glue without primer?

Some will tell you that primer is not necessary to create strong PVC joints. … While you may be able to create strong joints without it, primer is an important part in making sure your joints are as strong as they possibly can be. We recommend you use primer on any joints that will have liquid media passing through them.

Does Blue PVC need primer?

According to the manufacturer, one class requires the application of primer, such as All-Purpose cement, Regular Clear PVC cement and Medium Gray PVC cement. The other class does not require the application of primer, such as Hot Medium Blue Lava PVC cement and Rain-R-Shine® Medium Blue PVC cement.

How long should you let Red Hot Blue glue dry?

If dry, pipe must be recoated. 3) Remove excess cement and leave joint undisturbed for at least 10 minutes. Full joint strength should be reached within 24 hours depending upon temperature and humidity.

What can I substitute for PVC primer?

Some plumbers, hoping to take a more affordable route, argue that acetone can be used as an alternative to PVC primer. Acetone is one of the main ingredients in priming fluid, after all.

What is the meaning of Blue Glue?

The New Hacker’s Dictionary The official IBM definition is “that which binds blue boxes together.” See fear and loathing. It may not be irrelevant that Blue Glue is the trade name of a 3M product that is commonly used to hold down the carpet squares to the removable panel floors common in dinosaur pens.

What is blue plumbers glue used for?

Oatey® PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber.

How long do you have to wait for blue PVC glue to dry?

After you joining the pipes you need to hold them together for at least 30 seconds so the cement can harden. It will take another 15 minutes for the joint to set to the point that it can withstand water pressure and another two hours to cure fully.

How long after gluing PVC can you run water through it?

After joining the pipes you must hold them together for 30 seconds until the plastic hardens or they can slip apart. It takes another 15 minutes for the joint to harden to a point at which it can withstand water pressure and two hours to fully cure.

Is purple PVC primer required?

Purple Primer can be used with all types, schedules and classes of PVC and CPVC pipe and fittings. A low VOC formulation. In most cases a successful solvent cement joint can be made without using a primer. But, if you want to increase the probability of making a successful joint, using a primer is the thing to do.

Article first time published on

Do you let PVC primer dry before cement?

2 Answers. No – PVC Primer does not need to ‘dry’ before use – in fact, it needs to be wet to do it’s job and not impede the cement – remember, plumbers in a hurry use this daily and aren’t sitting around waiting for the primer to dry before grabbing the cement.

Does oatey all purpose cement need primer?

Weight:0 LBSize:4 oz.

Can I use rubbing alcohol instead of PVC primer?

Honestly, I’ve never used primer. If you wanted to cut corners, you could use rubbing alcohol to clean the PVC (tht’s what I do) immediately prior to gluing. Of course, let the alcohol evaporate before gluing. For the glue, I just used the regular stuff from home depot.

What is the purpose of PVC cement glue?

PVC Primer and Cement Primer acts as a cleaner, preparing the pipe by softening it’s surface and removing any glaze that may be present. People often buy colored primer, as plumbing code sometimes requires visual proof of primer use. PVC cement is often referred to as “glue,” but it works in a very different way.

Is PVC primer and cleaner the same thing?

The active ingredient in PVC primer is a chemical called tetrahydrofuran. PVC is soluble in tetrahydrofuran. … Cleaner only sometimes contain tetrahydrofuran, as opposed to primer, which always includes it. Cleaner is used to prepare the surface to remove any dirt, oil or contaminants that may weaken a joint.

Does rain or shine need primer?

TECHNICAL SPECIFICATION: Oatey Rain-R-Shine Medium Blue PVC Solvent Cement is recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 6” diameter with interference fit. Where local codes permit, priming step is not necessary for non-pressure pipe less than 4” diameter.

How do you remove blue pipe glue?

Apply a small amount of acetone-based nail polish remover with a clean soft cloth. Dab sparingly on the area. Be sure not to soak it. Remove the loosened glue gently and repeat the process a few times if required.

What is the difference between blue and green PVC glue?

Each type of solvent cement is colour coded (for easy identification) in accordance with AS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings. Green is for pressure applications and blue is for non-pressure applications.

What does blue stand for?

What is the association? The color blue represents both the sky and the sea and is associated with open spaces, freedom, intuition, imagination, inspiration, and sensitivity. Blue also represents meanings of depth, trust, loyalty, sincerity, wisdom, confidence, stability, faith, and intelligence.

What Agglutinate means?

1 : to unite or combine into a group or mass. 2 : to form words by agglutination. agglutinate.

What is the difference between blue and clear PVC cement?

Medium Clear PVC Cement: Fast drying and suitable for potable water, pressure pipe, conduit and DWV applications. … Hot Medium Blue Lava PVC Cement: Extremely fast setting and the preferred formula for emergency, repair and cut-in work for potable water, sewer and DWV applications.

Which of the three types of plastic pipe is the only material that requires priming?

White or beige pipes (PVC and CPVC) also require a primer. You don’t need a PVC primer with black ABS pipe. Read the label to match the solvent cement to the type of pipe you’re using.

How long does Christy's hot glue take to dry?

Remove excess cement and leave joint undisturbed for at least thirty minutes. Full joint strength should be reached within 24 hours, depending on existing temperature and humidity.

What is the best glue for PVC pipe?

For home repairs and small plumbing projects we recommend using an Oatey brand PVC cement. Oatey is very easy to find at the local home improvement store.

How long after gluing CPVC can you turn water on?

For a 1 1/2- to 2-inch pipe with up to 160 psi, Corzan recommends allowing a cure time of 30 minutes when it’s 60 to 100 degrees Fahrenheit, 45 minutes when working in 40- to 60-degree temperatures and an hour when conditions are below 40 degrees.

What is the difference between purple and clear PVC primer?

The purple is so that the building inspector can tell that the plumber used primer by visual inspection. Clear is fine to use.

Why is PVC primer dyed purple?

The purpose of the primer is to clean and soften the outer coating of the pipe so that the actual cement will bond more effectively. The purple color is just a dye so that it’s easier to identify whether or not primer has been used on a particular joint.