How do I find out what transmission I have

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

How do I find my transmission by VIN number?

Simply write the VIN number down and you can then ask a dealership service department, auto repair shop, or auto parts retailer to help you identify the transmission. They’ll easily be able to find the specs by plugging the VIN number into the computer.

Where is the transmission serial number located?

Transmission serial numbers can be found on the Transmission data plate. The serial number of an Allison transmission may be located on the transmission data plate. This can be located on the side of the transmission.

Does VIN number show transmission type?

Why can’t I determine the transmission type for my VIN? … Unfortunately, this is not required by the NHTSA VIN standard. Some OEMs still use the same 10-digit VIN patterns for automatic and manual transmission vehicles, meaning that VIN alone will not be enough to determine the vehicle’s transmission type.

What does the 9th digit in a vin mean?

Vehicle Description Section The fourth through eighth digits describe your vehicle’s model, body type, restraint system, transmission type, and engine code. The ninth digit is the check digit, which is used to detect fraudulent VINs.

How many types of transmission are there?

Three Types of Transmissions: Manual, Automatic, and CVT.

What vehicles have a 4r75e transmission?

Ford (F-150 Series pick-up trucks, E-150 Series vans, Explorers, Expeditions, Crown Victorias, Mustangs and Thunderbirds)
Lincoln (Town Cars and Mark VIIIs)
Mercury (Cougars, Grand Marquis, Mountaineers and Marauders)

Where is the serial number on a Chevy transmission?

The source serial number location is typically found on the driver’s side of the transmission on most Chevy vehicles.

How can I tell what year transmission I have?

On the inside edge of the driver’s door is a tag that lists the year of the vehicle, country of origin, the type of engine installed, and usually, the transmission.

What does the 10th digit of a VIN mean?

What Does the 10th Digit in a VIN mean? The 10th character, which is found in the VIS, indicates the vehicle’s model year. This does not necessarily indicate the year it was manufactured. It is not uncommon for manufacturers to start building a model year in the second half of the previous year.

Article first time published on

Can I lookup my vehicle specs by VIN number?

Go to a VIN decoder website, such as AutoCheck.com, DecodeThis.com or DMV.org. You can use any of these websites to decode your VIN and reveal the meaning of each character to find vehicle specs. Enter the VIN in the search box on any of these sites, then press “Enter.”

How do you decode a 10 digit VIN number?

Digits 1 through 3 combined is the WMI, (World Manufacturer Identifier).
Digits 4 through 8 represent the vehicle descriptor section.
Digit 9 is a check digit.
Digits 10 through 17 is the Vehicle Identifier Section.
The 11th digit is the manufacturer’s plant code.

What's the difference between a 4R75W and an 4R75E?

The 4R75W and 4R75E transmissions are identical, save for an electronic speed sensor located on the turbine shaft of the later unit. The 4R75W and 4R75E transmissions feature a sealed case and are considered a maintenance free, “filled for life” system.

What is a 4R75E transmission?

The 4R75E transmission is one of the most popular transmissions from the Ford AOD (automatic overdrive) line of transmissions. The Ford AOD is a four-speed automatic transmission. With this transmission, the fourth gear is the overdrive.

What are the 7 types of transmission?

Automatic Transmission (AT) …
Manual Transmission (MT) …
Automated Manual Transmission (AM) …
Continuously Variable Transmission (CVT)

What are the 2 kinds of transmission?

There are two types of contact transmission: direct and indirect. Direct contact transmission occurs when there is physical contact between an infected person and a susceptible person. Indirect contact transmission occurs when there is no direct human-to-human contact.

What are the types of automatic transmission?

Dual Clutch Transmission (DCT)
Continuously Variable Transmission (CVT)
Automatic Manual Transmission (AMT).

How do I know if I have a 4L60E or 4L65E?

The two transmissions cannot be differentiated from the outside. The 4L65E shares the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E. 4L60E uses a 6.5″ depth bell with 6 bolts for non gen 3 LS applications and a 7″ depth bell with 7 bolts for LS applications.

How can I tell if I have a 700r4 transmission?

Transfer Case Gasket Bolt Pattern. The easiest way to identify if you have a 700r4 is to raise your car and check the bolts around the transfer case. …
Identification Tag. The safest way of checking your transmission is to look at the identification tag on the transmission.

How do I know if I have a TH400 transmission?

It is identified easiest by its “375-THM” designation cast in the underside of the tail housing. The TH475 was an extra-heavy-duty version, and was found in larger trucks from 1971 on. If you are trying to determine the TH400 from another in a vehicle, a fast way to tell is to look at the kick down mechanism.

Which is better 4L60E or 700r4?

If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. If it has a cable connection near the cooler lines on the passenger’s side, that’s a 700R4. The good news is that either way, you win.

How do I know what GM transmission I have?

The easiest method of GM automatic transmission identification is to examine the transmission pan. New transmission designs came with new, unique pan shapes, and the general shape of the pan often paints a fairly clear picture of which automatic transmission you are dealing with.

How do I identify a Chevy 350 transmission?

The 350 transmission is easily identified visually, by counting the pan bolts and by locating transmission number. This number contains the year of manufacture, but does not identify the transmission as a THM350.

What does the 5th digit in a VIN number mean?

Vehicle Descriptor Section Each manufacturer uses this six-digit field in its way. … At Toyota, the fifth digit of the VIN identifies the engine and the sixth digit represents the series. The seventh digit details the restraint system, including seat belts and airbags. The eighth digit identifies the model.

Does the VIN tell you the year?

The 10th character in the 17-character VIN represents the vehicle model-year. This standard applies to vehicles built in or after 1981. Before 1981, the VIN format was not standardized and varied by manufacturer.

How do I decode a Chevy VIN number?

1G1 = Manufacturer (Chevrolet United States)
J = Platform Code (Chevrolet Cavalier)
C = Platform Series Code.
1 = Body Style (Two-Door Coupe)
2 = Restraint Type.
4 = Engine Type (LN2; 2.2L; Gas L4 SFI)
0 = Security Code.
1 = Model Year (2001)

What is the best free VIN check website?

You can get a free VIN check at the National Insurance Crime Bureau (NICB), VehicleHistory.com or Just pop in your car’s digits and these sites will do the VIN lookup and give you information on the vehicle. But you should use more than one of these sites to get the full picture.

What type of vehicle do I have?

The back of your car should have the manufacturer’s name on one side and the model on the other side. Plus, the car maker’s logo is usually on the front and back of your car. The make and model of the vehicle is usually located on the cover of the owner’s manual.

When did VIN numbers go to 17 digits?

DESCRIPTION: A vehicle’s identification number (VIN) is a unique identifier. The most common VIN format is the 17-digit VIN, which became standard for all vehicles manufactured since January 1981.

How do I know if I have 4R70W?

Baumann Electronic Controls identifies the gear ratios as follows: For the 4R70W: 1st = 2.84 2nd = 1.55 3rd = 1 4th = 0.70. For the AODE: 1st = 2.40, 2nd = 1.47, 3rd = 1, 4th = 0.667. The AOD and the AODE have the same ratios.

Can I replace a 4R70W with a 4R75W?

For the tranny, the 4r75w and 4r75e are pretty much identical, but the 4R75E is just newer. The 4r75 cases are the same as the 4r70, so it will bolt directly in with the same dimensions and everything, and the driveshaft will remain the same.