How do I identify my American Standard toilet

Where can I find the model number of my toilet? Carefully remove your tank lid, and place it gently on the floor. You’ll notice a four-digit number located on the back of the tank, near the water level mark. This is your tank model number.

Where is the model number located on a toilet?

All toilets have model numbers which are typically located on the underside of the tank lid.

How do I know if my toilet is round or elongated?

Toilet seats are sold by shape (not by length). If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).

How can you tell what year a toilet was made?

If you look inside of the tank, you will find the date stamped somewhere near the top of the water line. We recommend that you replace your toilet every 10-15 years depending on the make and shape of the toilet. If your toilet predates 1992, it probably uses more than 2 gallons per flush.

Where is the color code on a American Standard toilet?

The number 3. The color. The brand: Look under the water tank lid (on the bottom); on the inside walls of the tank; on the bowl between the bolts attaching the seat.

How do I know if my toilet is 10 or 12?

If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.

Are toilet cisterns a standard size?

Considered the standard type of cistern till very recently, low level cisterns are sited just above and behind the WC pan. … Dimensions: Low level cisterns are on average 455mm wide, 350mm high, and project 230mm from the wall. Larger and smaller sizes are also available.

Where is American Standard toilet made?

American Standard products made in China.

How do I know if my toilet is a 10 or 12 rough?

If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.

What is the most popular toilet?

Our top pick is the American Standard Mainstream WaterSense Elongated Toilet (view at Lowe’s). It is a well-made product from a company with a long history of making great toilets, available for a good price, and includes all of the features that you need to make your bathroom look and function well.

Article first time published on

Where is the model number on a crane toilet?

Place the tank lid on the floor. Near the water level mark, you’ll see a four-digit number on the back of the tank. You have the tank model number.

What shape toilet do I have?

You can determine if a toilet seat is round or elongated by taking one simple measurement. Measure the length of the toilet bowl from the center of the toilet seat bolt holes at the back of the toilet, to the front edge of the toilet bowl. Round toilet bowls measure at about 16.5 inches.

Does toilet seat have to match toilet?

As a general rule, match elongated seats to elongated toilets and round-front seats to round-front toilets. However, before you make your final choice, you will want to be certain that your toilet seat is compatible with your toilet in terms of size, style and color.

What is the difference between standard height and comfort height toilets?

The difference between standard height and comfort height toilets is approximately two inches. … It will measure 17 to 19 inches from the floor to the seat. Often this height toilet is priced less than the standard height toilet.

What is the most popular toilet color?

White. White is the most common color of toilet, and all major manufacturers have at least one shade of white in their catalog. This stark color reflects the most light making it suitable for both small and large bathrooms.

What color is biscuit toilet?

Biscuit may be just what you’re looking for. Biscuit is the common name given to a creamy, off-white color readily available in many categories of bathroom fixtures.

Are toilet cistern universal?

As you can imagine, universality across concealed WC cisterns is not yet the norm, with a range of different sizing across our hidden cistern product range. However, it can be attained and for excellent value – as you can see in Drench’s very own Universal Dual Flush Concealed Cistern & Round Button.

How do I know what cistern I have?

Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on – some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.

Can I replace my toilet cistern?

However, you don’t always have to change the entire thing – you can always replace parts of a toilet in stages. This may be to save costs or you may have come across an issue. If that’s the case, outside of a flusher or seat, your cistern will often be replaced.

How do I know what toilet to buy?

1. To determine the size of your toilet rough-in, measure from the wall behind the toilet to the bolt caps of your current toilet. …
2. Most toilets are available in a 12-inch rough-in, which is the standard distance, but a 10- or 14-inch rough-in may be needed in some homes.

What is 12-inch rough-in for toilet?

The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.

Are all toilet sizes the same?

Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.

Can a toilet be more than 12 inches from the wall?

You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.

Can you replace a 10-inch rough-in toilet with a 12-inch rough-in toilet?

The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.

What is a compact toilet?

Essentially, a compact toilet simply takes up less space. This is done by giving it a smaller water tank or seat or opting for a round bowl instead of an elongated one. … There are compact toilets that sit on the floor like a standard toilet, and then there are those that are mounted to the wall.

Is American Standard a good toilet?

The American Standard toilet is not only one of the best toilets you can get, it’s also the brand that plumbers recommend most. Their toilets are water-conserving while offering great flushing power. Many of these toilets are also ADA compliant and make going Number 2 actually feel like sitting on a very comfy throne.

What toilet brands are made in the USA?

The biggest U.S. toilet suppliers are Kohler Co., with an estimated 24% of the U.S. market, followed by American Standard, 18%; Toto, 9%, and Mansfield, 8%, according to GMP. Kohler has kept three U.S. toilet plants—in Kohler, Wis.; Brownsville, Texas, and Spartanburg, S.C.—and runs a large plant in Monterrey, Mexico.

Is American Standard and carrier the same?

American Standard HVAC System. Carrier is another well-known line in HVAC manufacturing. The company carries a wide range of models, including the Carrier Infinity 21 Air Conditioner 24ANB1. In the same way as American Standard, Carrier leads with innovation and technology to meet the needs of today’s homeowners.

Is a 1 piece or 2 piece toilet better?

Performance-wise, there is no difference between the one-piece and two-piece toilets. They can have the same flushing power and efficiency. The interior parts are almost identical if they are from the same manufacturer. They may even have the same features and specifications.

Why would I want an elongated toilet bowl?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

Which brand of toilet is best?

• American Standard. Are you a patriot? …
• TOTO. Oh, the one and only, the ninja of toilets. …
• Kohler. …
• Duravit. …
• Niagara Conservation. …
• Sterling. …
• Jacuzzi. …
• Saniflo.