How do I set my Kwikset smart key

Open your door.Extend the latch bolt.Slide up the cover to open the back of your lock, exposing the buttons beneath.Push and hold the reset button for 10 seconds, until the lock beeps.The light ring will flash red, then spin amber.The lock has now been restored and is ready to be set up again.

How do you reset a Kwikset?

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.
6. The lock has now been restored and is ready to be set up again.

How do I change the code on my Kwikset touch screen?

1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
2. Press Checkmark symbol once.
3. Enter Mastercode.

How do I reset my Kwikset SmartKey lock without key?

1. Prepare Necessary Tools And Workspace.
2. Remove The Locks From Your Door.
3. Free The Cylinder From The Housing.
4. Get The Plug Out Of The Cylinder.
5. Pull The Plug Out Of The Core.
6. Find The Reset Tab To Align The Wafers.
7. Insert New Key.
8. Reassemble The Lock.

How do you change the code on a Kwikset Halo?

1. Open the Kwikset app.
2. Tap the Menu icon.
3. Select Account Settings.
4. Select Account.
5. Select Change Password.
6. You will be prompted to enter your old password, then the New Password fields must be filled out.

What is the master code for Kwikset lock?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

Can Kwikset locks be rekeyed to any key?

You can rekey all of your locks to match an existing key when the locks all have the same keyway. … So it is impossible to slide a Kwikset key into a Schlage lock and a Schlage key into a Kwikset lock. These two locks cannot be rekeyed to match an existing key of the other.

Are all Kwikset keys the same?

A Kwikset SmartKey tool (One should’ve came with your lock, but if not, you can buy one on Amazon). The new (or rather, old) key that you want to use instead. This must be a Kwikset key, as Kwikset and Schlage keys are totally different from one another (and won’t work in each other’s locks).

Why is my Kwikset lock blinking red?

Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.

Does Smart Key work with any key?

Answer: Each SmartKey lock can be re-keyed to any SmartKey key – if you buy two re-keying sets, you can key all of your locks to one set; if you go out of town, you can just re-key one lock in your house to a different set, then give one of those keys to your neighbor/house-sitter.

Article first time published on

How do you change the code on a Kwikset 909?

Changing the Code Step-by-Step While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad. Press the “Lock” keypad button at the center of the SmartCode keypad.

How do I change the code on my Kwikset 264?

1. Enter your Programming Code.
2. Press “”Kwikset”” then “”1″” then “”Kwikset””
3. Enter a new User Code. It must be between 4 and 10 digits.
4. Press “”Kwikset””
5. Test the code: While your door is open, lock it and enter your new User Code to make sure it unlocks the door.

How do you change the code on a Kwikset 916?

1. Make sure the door is open. Press the Program button once.
2. Press checkmark symbol once.
3. Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.
4. Press lock symbol once.

How do you reset a Kwikset lock code 955?

1. Make sure the door is open and unlocked.
2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
3. Press and release the program button. …
4. Test with an existing User code, the lock should not work.

How do I light up my Kwikset keypad?

To light up the keypad buttons, press the 1-touch locking button. Pressing the other/numerical buttons will not cause the keypad to light up. Check that the LED option is turned On in the Kwikset App. The Status LED is set to On by default.

Why is my keypad door lock not working?

If the keypad buzzes twice after a code is entered and the door fails to unlock, this means the keypad is not communicating with the lock. A reset should fix this issue. … To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again.

Where is program button on Kwikset lock?

For most Kwikset smart locks, the program button is on the inside of the interior assembly. You may need to remove the interior cover to access the program button.

Can Kwikset Smart Keys be copied?

there is no cutting of key unless you wish to duplicate the keys that come in the kit. each kit will be unique, the chances of getting 2 identical kits are the same as buying two locks with identical keys. … If you have any old keys that will fit Kwikset brand, you can rekey to any key.

How do you use a Kwikset rekey kit?

First, insert the functioning key and turn it ¼-turn clockwise. Then, insert and remove the SmartKey learn tool. Follow by removing the functioning key, inserting a new key, and turning it ½-turn counter-clockwise. Your lock is then successfully re-keyed.

How do you clear the code on a Kwikset lock?

1. Make sure the door is open.
2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
3. Press 2 to delete a user code. …
4. Press Kwikset.
5. Enter the user code you wish to delete. …
6. Enter the user code again.
7. Press Kwikset.