How do I set my Nexia Trane thermostat

If you choose Auto, the Trane thermostat will operate your HVAC unit as needed to match the input temperature.

What is auto mode on Trane thermostat?

If you choose Auto, the Trane thermostat will operate your HVAC unit as needed to match the input temperature.

How do I reset my Trane air conditioner?

1. Turn the thermostat to the “Off” position. Wait a few minutes, then turn the thermostat either to “Heat” or “Cool.”
2. Set the thermostat to the desired temperature. …
3. Go to the circuit breaker box if you do not feel or hear airflow. …
4. Turn the thermostat off and then on again.

How do I reset my Trane 524 thermostat?

1. Shut Down Your AC at the Thermostat. …
2. Find Your Circuit Breaker Box. …
3. Reset the Circuit Breaker for Your AC Unit. …
4. Wait 30 Seconds. …
5. Turn the AC Thermostat Back On. …
6. Call Vredevoogd Heating & Cooling for all your Furnace & AC needs.

How do I set my Trane thermostat to auto?

Press the “System Mode” button to switch between “Heating,” “Cooling” or “Auto.” When you choose “Auto,” the thermostat will operate the heating or cooling system as needed to match the input temperature setting.

Should your AC be set on auto or on?

Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.

Should thermostat be on auto or on?

If you want to keep the energy bills low, you should set the thermostat to ‘Auto’. However, if you prefer more even distribution of heat inside the house, it’s better that you set the thermostat setting to ‘On’.

Why is my Trane thermostat not working?

Your thermostat/control may be off or set incorrectly. … Check temperature setting on thermostat/control. If no change, contact your local Trane Dealer. In the meantime, try turning off your thermostat/control for 1 to 3 hours to see if it will reset itself.

How do I reset my programmable thermostat?

A common way to reset almost any thermostat is to hold down the reset button for 5+ seconds. Alternatively, try resetting battery-powered thermostats by flipping the battery directions around for 5s, then flip them back. If all else fails, switch off the power at the circuit breaker for a couple minutes.

How do I reset my Trane code?

To have your Trane air conditioner reset (and clear an error code), all you need to do is simply reset the circuit breaker. We suggest you wait a couple of minutes before restarting the unit.

Article first time published on

Why is my Trane thermostat not heating?

ANSWER: Your thermostat may not be calibrated properly or set too low. Make sure your thermostat is set to heat. Try setting the temperature 2 to 4 degrees above room temperature. ANSWER: Clean or replace your filters.

How do you calibrate a Trane thermostat?

Select Settings. Select Thermostat. Select Indoor Calibration. Use the up and down arrows to calibrate the temperature and/or humidity.

How do you turn off the schedule on a Trane thermostat?

To clear schedules in the thermostat, hold the button next to it. You will be able to operate the thermostat in a manual mode. The temperature won’t change when you set it.

Why is my Nexia thermostat not working?

If you feel the thermostat is not reporting properly, then proceed to reboot the thermostat. If the regular reboot does not work then you may need to flip the breaker associated with the thermostat to the off position for 20 seconds, however the system cannot be running when this is done.

How do I take my Trane thermostat out of Nexia?

On the thermostat that you want to remove from your account, press Menu. Select Nexia (or Smart Home). Tap Advanced. Choose Unregister.

How do you unlock a Trane air Fi thermostat?

1. Examine your thermostat and find both the (+) and (-) buttons.
2. Put one finger on the (+) and one finger on the (-) button. Press these buttons at the same time.
3. Hold both buttons down for approx. five seconds and then release. Your thermostat should now be unlocked.

Where is the model number on a Trane thermostat?

Finding the model number of a thermostat is easy. It should be printed on the back of the face-plate.

Why is my Trane AC running but not cooling?

WHY ISN’T MY AIR CONDITIONER BLOWING COLD AIR? … For your indoor air handler, try to wipe away any buildup of dust on the coil and change the air filter often. Your filters may be clogged or dirty Clean or replace the filters. Consult your local Trane Comfort Specialist™ if you are unsure where the filters are located.

What is Nexia thermostat?

What is a Nexia Thermostat? In the simplest terms, it’s a Wifi thermostat, which means it’s compatible with a variety of smart-home technology in ways that non-wifi thermostats aren’t. The Nexia uses Z-wave technology, which isn’t proprietary to Nexia.

Should my thermostat be set on gas or electric?

With it set to gas the furnace controls when the fan comes on. When set to electric the thermostat activates the fan. With electric furnaces the fan should come on right away. If there is a delay or the fan doesn’t come on at all then you have a problem.

Whats the difference between auto and on?

AUTO means the fan turns on “automatically” ONLY when your system is heating or cooling your air. When the thermostat reaches your temperature setting, the system, including the blower fan, shuts off. … ON means the fan is CONSTANTLY blowing, even when your system isn’t working to heat or cool the air.

What does the hold button on a thermostat do?

By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming. … Get your free estimate on a smart thermostat today.

Is it cheaper to leave thermostat on auto?

The general wisdom tends to be to keep the thermostat set to AUTO instead of ON. But is there really a difference? Absolutely! Keeping your thermostat set to “ON” can actually cost you more money, compromise the air quality in your home, and cause more maintenance issues.

What is the difference between cool and auto mode in AC?

In air conditioner auto mode designed to save energy and blow ur air as per temp desired temperature deman. Cool Mode won’t switch to Heat if it gets too cold. Heat Mode won’t switch to Cool if it gets too warm. Auto Mode will use Heat or Cool to hold a room temperature.

Why is my thermostat reading the wrong temperature?

Your thermostat will read the wrong temperature if it isn’t located in your home’s most optimal place. If it’s located near drafts or heat sources, or it’s in an area that isn’t centrally located, you may need to have it moved. If you can’t fix your thermostat problems, contact an HVAC professional soonest possible.