How do you hardwire a towel warmer

They can be plugged into a standard outlet or hardwired to the home’s circuit. Hardwiring a towel warmer requires some electrical work; however, plug-in towel warmers only require a three-prong outlet.

Can plug in towel warmer be hardwired?

They can be plugged into a standard outlet or hardwired to the home’s circuit. Hardwiring a towel warmer requires some electrical work; however, plug-in towel warmers only require a three-prong outlet.

Can you plug in an electric towel rail?

Plug-in models All that is required to be installed is a power outlet (unless you already have one in the correct location), and then the heated towel rail can be installed and plugged in. … The cable usually comes out the bottom or side of the heated towel rail and will be visible when plugged into a power outlet.

Does a towel warmer require a dedicated circuit?

Make sure that you have an electrical junction box in the wall where you want to hang your towel warmer. … Ideally, the towel warmer will be on a dedicated circuit because it will be on all the time. Towel warmers use less electricity than a light bulb so the electrical demand on the circuit is usually light.

Do electric towel warmers heat the bathroom?

One of the most commonly asked questions when it comes to the functionality of heated towel rails is, do they actually heat up your bathroom? In short, the answer is yes! Heated towel rails are ideal for making your bathroom a warm, comfortable place to be… especially on those cold winter days!

Can you install a heated towel rail yourself?

You can fit them in the same way as a standard radiator. The easiest way to fit your new towel radiator is to replace a radiator of the same width. … Simply turn off your heating, then isolate your old radiator by shutting off the valves on either side before removing it from the wall.

How do you control the heat on an electric towel rail?

The most common method for adjusting temperature will be to adjust the knob by turning clockwise to turn off – I.e. cool or anti clockwise to open and up the heat. Turning the knob could be difficult, and so pliers might be required.

How many amps does a towel warmer pull?

150 Watts, 1.3 Amps, 110 Volts.

How do you install an electric element in a towel rail?

Turn the towel radiator upside down and screw the electric element into either side of the towel radiator. Use PTFE tape wrapped clockwise around all male threads to assist in making watertight and complete sealed joints. Insert and screw blanking plug to the other side of the towel radiator.

Are heated towel rails worth it?

So are heated towel rails worth it? If you’re looking for a little extra comfort during the winter and a space saving storage option for your towels, then heated towel rails are definitely worth it! With a range of colours available, these rails are also a great way to tie a space together.

Article first time published on

Are heated towel rails expensive to run?

Electric heated towel rails are operated like any other electric heater, being turned on and off with the flick of a switch. These rails avoid the issue of having to switch on the rest of your central heating, however they can be expensive to run due to the power requirements of the heated element within.

How close can an electric towel rail be to a shower?

Zone 1 & 2 Zone 1 is the zone above your bath or shower to a height of 2.25m. If you were to install a heated towel rail in this zone, it would need a rating no lower than IPX4. Zone 2 stretches to a 0.6m outside your bath or shower and above your bath or shower if over 2.25m.

Can you put an electric towel rail in a bathroom?

Even if you’re simply considering the possibility of putting an electric radiator or towel rail in your bathroom, you need to be fully aware that this job can only be done by a qualified electrician. … This is a legal requirement and is doubly important when it concerns a room that can get very wet, such as a bathroom.

How long does an electric towel rail take to heat up?

Whilst centrally heated rails may take 20 minutes or more to heat up fully, an electrically heated towel rail with timer can generally reach its desired temperature in less than 5 minutes.

Why is my towel rail not getting hot?

You may notice that the towel rail is not heating up and, specifically, the top rungs of the rail are colder than the bottom ones. You may also have heard knocking or tinkling through your pipes and radiators. This is usually caused by trapped air and bleeding will normally solve this.

Can a towel rail heat a small bathroom?

A towel rail will heat a bathroom efficiently, provided that it’s sized correctly for the space it’s in. A small heated rail, such as the one pictured below, is designed for hand towels and likely won’t make much of a difference to the temperature of your bathroom in winter.

How do I turn the heat down on a towel radiator?

How do you turn a towel radiator on/off? To turn off your towel radiator, first turn off the central heating and allow the towel radiator to cool down. Then adjust the valve, turning it in the direction it would normally be turned to reduce the heat. When it can’t be turned any more, the radiator should be turned off.

What are the 2 valves on a towel radiator?

One valve accounts for the amount of hot water that enters the radiator. The other valve, referred to as the lockshield valve, balances the system by regulating how much heat the radiator gives off.

Do you need a plumber to install a heated towel rail?

If you’re having a dual fuel heated towel rail fitted, then this needs to be connected to the hot water central heating system AND to the electrical mains supply, so you’ll either need to find a professional who can legally do both, or get a plumber and an electrician to install it safely and correctly.

What is a hydronic towel rail?

Hydronic Heated towel rails are the ultimate in bathroom luxury. They provide radiant heat to the bathroom, whilst keeping your towels fluffy, dry and warm. … All heated towel rails are designed and manufactured by Hydrotherm Australia and are 100% Australian made and owned.

How high should a towel radiator be from the floor?

1. The standard towel bar height is 48 inches above the floor.
2. Lower the height to 44 inches to accommodate those with limited mobility.
3. Lower the height to 36 inches for little ones.
4. Leave a four-inch clearance between towel bars and outlets or switches.

What FUSE do I need for an electric towel rail?

The Fused Connection Unit should be fitted with a 5 Amps fuse to BS1 362. 12. Switch on mains supply and test. The towel radiator should heat up.

What fluid is in an electric towel rail?

It’s a special solution of 85% deionized water and 15% Ethylene Glycol (10 litres). This solution is used to fill electric radiators. It can tolerate low temperatures and helps maintain your desired temperature.

How much water do you put in an electric towel rail?

The entire towel rail does not get hot Top-up the towel rail by removing one of the top plugs and fill it with water only allowing around 10% of the height for expansion when the water gets hot. If you are refilling a towel warmer from empty then a combination of 85% water and 15% corrosion inhibitor is recommended.

Can you put an electric towel rail upside down?

Turn the towel radiator upside down and screw the electric element into the either side of the towel radiator. Use PTFE tape wrapped clockwise around all male threads to assist in making watertight and complete sealed joints.

Why is my electric towel rail not working?

If there is still no heat whatsoever then the element or electrical installation may be faulty. The entire towel rail gets warm but not hot enough. Fluid level (if liquid filled) should be checked; it should be approximately 90% full. … Standard element should be turned on for at least 4 hours.

How does heated towel rack work?

You plug the towel rail into the power point, and the electricity heats up the liquid in the rails, which in turn dries the towels. Hydronic rails use a liquid as well. The rails are hollow, and the unit is connected to the hydronic heating system in a house. This pumps hot water through the rails, heating them up.

How many watts do you need for a towel rail?

SIZE MM (HxW)WATTS600 x 600300 – 500600 x 1000300 – 5001200 x 400400 – 6001200 x 500400 – 600

How many watts should a towel warmer be?

Also, bear in mind that towel warmers run on approximately 500 Watts of electricity, so you can expect to see a spike in your electricity bill if you use it every day.

How are heated towel rails connected?

A standard heated towel rail is a towel rail that is connected up to your central heating system, just like your radiators. … Your radiators and heated towel rails are connected up to this pipe network and are heated up by hot water.

Can you leave heated towel rail on all the time?

Heated towel rails are designed to be left on all the time and there are no safety issues to consider if you decide you want to keep them running. A standard heated towel rail will typically come on and off in accordance with the main central heating system.