How do you repair Trex decking

Fill nicks and scratches with an epoxy-based filler and a putty knife. … Try the heat method. … Replace scratched boards with new ones. … Consider consulting the manufacturer or retailer about your scratched decking.

Can you touch up composite decking?

If the boards on your composite deck have chips or small cracks, you may be able to repair them by using a composite deck repair kit — depending on the materials and the manufacturer of your deck’s boards.

Can Trex be resurfaced?

Resurfacing your deck with trex® is easy to do, and the results are easy to love. If the boards on your existing deck are looking a bit worn – and the foundation and deck framing system are sound – you can simply replace the walking surfaces and deck railings with Trex decking and railing.

How do you fill holes in Trex decking?

Fill small holes, using a putty knife, with a mixture of fine composite board shavings and silicone caulk. The consistency of the mixture should be thick enough that it will not seep out of the bottom of the hole. Match the color of the caulk to the deck boards.

Can you recolor Trex decking?

A: You are correct. Vintage Trex decking and other brands of composite decking made of a uniform mixture of wood fibers and plastic can be painted or even stained. Newer styles of composite decking capped with a shell of different material on the top and sides of boards cannot.

Can you caulk composite decking?

Many builders agree that caulking, especially the gaps on decking, is a poor show of craftsmanship. … It is often used in wooden decking, but it may also work in composite decking. For this method, you will need to clean your patio from dirt and debris first.

What is the best glue for composite decking?

In conclusion, sanded and flame treated TREX and SmartDeck produced the best adhesion. In both cases, a builder should see favorable results bonding TREX and SmartDeck (with some surface preparation) plastic/wood decking with WEST SYSTEM epoxy.

Can you nail composite decking?

You can screw or nail composite decking boards just like wood ones. Three-inch decking screws are the best fastener choice; they sink a secure distance into the joists and won’t back out like nails. There’s little danger of splitting the boards when driving them, so you don’t need to pre-drill.

Should composite decking have gaps?

As temperatures fluctuate, composite deck boards will naturally experience thermal expansion and contraction. That’s why the board ends should never be installed tight against one another. There should always be a slight gap.

Does composite decking need expansion gaps?

Make sure the composite deck boards do not over hang the joist at the edge by more than 20mm and a 20mm expansion gap should be left between the wall or other ﬁxed objects surrounding the composite deck.

Article first time published on

How much does it cost to resurface a Trex deck?

SeriesPrice Per Square FootTranscend$10 – $12Select$7 – $9Enhance$5 – $7

What's the best deck restore product?

J-B Weld 40005 Wood Restore Premium Epoxy. …
Pour-N-Restore Composite Deck Spot Remover. …
Gemini 895 Restore-a-deck Cleaner & Brightener Kit. …
Wolman Wood Care Products 16116 Deck/Fence Brightener. …
Restore-A-Deck Stain Stripper. …
RUST-OLEUM 51752 Restore Gallon Deck Cleaner.

How do you make Trex decking look new?

Step 1: Pre-spray your deck. …
Step 2: Spray with soapy water & scrub. …
Step 3: Rinse thoroughly. …
Step 1: Pre-rinse. …
Step 2: Mix up your vinegar solution. …
Step 3: Sprinkle baking soda. …
Step 4: Rinse thoroughly.

What kind of paint do you use on Trex decking?

Composite decking requires latex paint with a satin or semi-gloss finish. To paint Trex deck, always start with an acrylic latex primer designed specifically for outdoor use. You should get some excellent coverage with Valspar or Rustoleum brands for composite decks.

Should you power wash Trex decking?

Trex does not recommend the use of a pressure washer. The use of a pressure washer on deck surface could damage the decking surface and will void the warranty with respect to any condition caused by the pressure washing.

Is there a glue for Trex decking?

Glue cannot be used as a primary fastener for Trex decking. When using Trex Fascia, glue can be used as a secondary fastener-see Fascia instructions in the Installation Guide for more details Installation Guide for more details.

Is polyurethane a glue?

Polyurethane bonds are waterproof, making it a good adhesive choice for outdoor projects. (Though they will not withstand being submerged for extended periods.) Paintable. While some ordinary adhesives’ performance will be impaired if they are painted, polyurethane can be painted after it has set.

Can Trex decking be removed and reinstalled?

An existing Trex deck needs to be relocated on a house and the wear surface “boards” need to come up for later reinstallation. They are installed with countersunk hex-head screws and over 50% are stripping out in a test area.

Can you fill decking gaps?

While you might be tempted to fill in gaps in your decking with wood filler or caulk, the natural movement of the boards can eventually cause the materials to break loose and make the gaps even worse. However, you can use rope to easily fill the gaps.

How do you repair composite wood?

Remove loose chips or rotted wood from the damaged area with a stiff-bristled brush. …
Fill the damaged area with wood filler using a putty knife. …
Sand the patched area with a medium-grit sanding block. …
Sand and smooth the wood filler with a fine-grit sanding block.

How do I stop my composite deck from scratching?

Furniture pads are a great way to protect your decking, especially if you tend to move furniture around. Those with metal bottoms are more susceptible to making scratches, so take particular care with them. There are many peel-and-stick protectors available in the market.

Which way does composite decking expand?

Yes, composite decking materials do expand and contract in all directions, but not as much as real wood. Composites are resistant to moisture. Instead, they change in size due to temperature. It will expand when under a hot temperature, while it will contract in the cold.

Does Trex shrink?

Any composite decking will expand and contract, its really just a matter of how much it expands and contracts and at what temperatures. … Quality composite decking should very very minimal shrinkage if manufactured correctly.

Can you face screw Trex decking?

The answer is yes for a solid composite decking (must be pre-drill and must check with manufacture). You can not drill or screw through a hollow composite deck as the screw will become loose and rise in time . Like the usual wooden decking boards, you can also screw down a solid composite decking.

Are nails or screws better for decking?

Nails have one huge advantage over screws when building a deck – they bend. Decks are often subject to the force of heavy winds. Due to the way wind can get beneath a deck and pull on it, nails will bend and prevent the deck from moving while screws, which have a significantly lower shear strength, will break.

Is it better to use screws or nails on deck boards?

The Consensus: For a deck build it’s best to use a combination of nails and screws. … Screws are superior for laying down the decking. They hold things flush better and have a better fastener/tensile strength, which keeps boards from popping up over time.

Does composite decking sag?

Your composite deck may not warp, but it can sag and buckle. Most sagging is caused by improper spacing between the joists when it is installed. … Composite decking is fade resistant, but it may fade over time in strong sunlight. Composite decking will get lighter in color tone as it fades.

Can you install Trex with no gaps?

When installing in temperatures below 4.5°C, Trex recommends 10 mm gapping. For docks and heavily wooded areas, Trex recommends a 10 mm gap as well. No gapping should ever exceed 13 mm.

Does Trex decking expand in heat?

It is important to recognize that composite decking expands and contracts with heat and cold.

Can you put new decking over old decking?

Yes, you can place any decking over an existing wood decking, even composites. … When placing materials over existing decking, the latter can directly affect the former. In the case of wooden decking, if the existing floors are old and rotting, the new materials on top will have their lifespan reduced.

Is there a cheaper version of Trex?

Generally speaking, Trex and Fiberon offer the least expensive options while TimberTech and AZEK come in on the higher end. However, keep in mind that the higher-tiered grades of Trex are more expensive than the lower-tiered grades of Timbertech so it’s important to make sure you’re comparing apples to apples.