How do you shift a Rekluse clutch

To begin moving, let the clutch lever out and simply twist the throttle. Upshift gears as you normally would using the clutch lever as you shift. Your Rekluse auto clutch engages during normal riding from idle to 1,800 RPM. While cruising, keep the RPM at or above 2,500 RPM to keep the clutch from slipping.

Do you use clutch to shift with Rekluse?

Do you still shift gears with a Rekluse auto clutch? Rekluse Auto Clutches automatically engage and disengage clutches, not transmissions. One must shift the gears up and down just like in a motorcycle with a manual clutch.

Can you wheelie with a Rekluse clutch?

It reacts pretty much the same way you’d expect a normal clutched-bike would to any given situation. You can spin the rear wheel, pull wheelies, dump the clutch to get instant drive etc in exactly the same way as you would with a conventional clutch.

What is the advantage of a Rekluse clutch?

Automatic modulation of the clutch allows riders to ride a taller gear through corners. The rear brake can be applied fully without fear of stalling. Ease of operation allows the rider to focus more on their line.

Are Rekluse clutches any good?

Hard Parts94Durability9/10Design10/10Price8/10

What are the different rekluse clutches?

• RadiusCX is the Taj Mahal of automatic clutch systems, featuring a plethora of Rekluse’s latest technologies. …
• RadiusX is the little brother to the RadiusCX.

Where are rekluse clutches made?

Rekluse clutches are proudly made in Idaho, USA. Watch to learn more about our awesome manufacturing team and facility.

What is a Endo motorcycle?

The stoppie is a motorcycle and bicycle trick in which the back wheel is lifted by abruptly applying the front brake, then, by carefully reducing the brake pressure, the bike is ridden for a short distance on the front wheel. It is also called an endo, or less commonly, a front wheelie.

How do I know what rekluse clutch I have?

the easiest way is to start it up, and click it into gear without pulling the clutch in. if it continues to idle then it has a rekluse.

What causes a Rekluse clutch to slip?

Too little free play gain can result in clutch slip and too much free play gain can result in clutch drag. … The free space is critical because it is what allows the clutch to spin freely until the engagement RPM is reached and the EXP disk expands to engage the clutch fully.

Article first time published on

What oil should I run with a Rekluse clutch?

Rekluse recommends the diesel engine oils as they are designed to work under higher long term temperature and stress loads than the average car oil which is what the average guy uses in his bike.

Do Supercross riders use Rekluse?

Following an impressive 2018 season for Rekluse riders, Rekluse is honored to continue supporting many of the sport’s top riders and teams as a trusted technical partner. … Rekluse is proud to announce their partnerships for the 2019 Monster Energy AMA Supercross season.

Do Pro Enduro riders use Rekluse?

No , the best pros don’t use rekluse in extreme events (Romaniacs, Erzberg, Roof of Africa) , maybe they use rekluse clutch cover because you can put +50ml oil and helps cooling the clutch components + they are sponsored by rekluse.

Is a Rekluse clutch good for motocross?

I can see no disadvantage to using a Rekluse in motocross. You can still use the clutch as manual for starts, you will hook up and have better traction off the start and thru turns. You will nearly never stall. You will not have to use the clutch lever at all, creating less arm pump.

How much oil does a Rekluse clutch take?

Transmission oil is, according to the manual, 0.71 qt’s (671 cc’s) total after draining, or 0.79 qt’s (747 cc’s) after disassembly. Add ten to that and, with the cover, you should use 681 cc’s after draining, or 757 cc’s after disassembly.

How does an auto clutch work?

When the clutch pedal is pressed, a cable or hydraulic piston pushes on the release fork. … As the middle of the diaphragm spring is pushed in, a series of pins near the outside of the spring causes the spring to pull the pressure plate away from the clutch disc. This releases the clutch from the spinning engine.

How does a semi auto clutch work?

The clutch pedal is connected to the transmission through cables and pipes. In a semi-automatic there is no clutch pedal. Instead, there is a computer that uses processors and sensors to automatically depress the clutch when the driver signals by shifting the gear stick.

Whats the difference between an endo and a stoppie?

An Endo is when the bike comes to a complete stop on the front wheel. But a true “STOPPIE” is more like this video. This is also referred to as a nose wheelie or nose manual. or this on a motorcycle: 137mp stoppie!

How do you know if your clutch is dragging?

1. Hard starting.
2. Vehicle movement during starting.
3. Hard shifting.
4. Hard shifting in high rpm.
5. Gear clash during shifting.
6. Engine stalls (on severe cases)

Can you fix a slipping clutch without replacing it?

A slipping clutch could result in damage to the pressure plate and flywheel, if not properly fixed. If you do not have experience in replacing clutches — it’s best to find a professional who has been trained and certified in slipping clutch repair.

How do you know if your ATV clutch is slipping?

Symptoms: A slipping clutch is quickly recognizable when you’re twisting the throttle with reckless abandon while the machine is in gear, yet the rear wheel isn’t rotating in unison with the engine’s rpm. If you’re wound out in third gear and only accelerating at a snail’s pace, then something is wrong.

What is a motorcycle slipper clutch?

A slipper clutch (also known as a back-torque limiter) is a specialized clutch with an integrated freewheel mechanism, developed for performance-oriented motorcycles to mitigate the effects of engine braking when riders decelerate.