What color should drip edge be

The most common colors for drip edge are white and brown. However, some roofing companies can provide color match drip edge. The color is often chosen to match the shingles or the gutters to create a seamless look. The color can also be chosen to match the shutters or trim of the house and act as an accent color.

Should drip edge be painted?

The drip edge in and of itself is designed to protect the integrity of your roof, but that doesn’t mean it doesn’t also need its own protecting! Priming and painting will deliver that protection, along with a cohesive aesthetic if your drip edge is visible.

What color should flashing be?

The flashing will come in either white or brown. If your trim is either of these colors that is fine. If your trim is white and the flashing is brown you MUST paint the flashing white otherwise the fascia will look too narrow to support the roof. Additionally the roof will appear too heavy.

How do you choose drip edge?

Drip Edge Material Types Galvanized steel: Drip edges are designed to be in contact with water; so, if they are made of steel, they need to be galvanized to prevent rust. Minimum 24-gauge steel is preferable so that the drip edge can withstand strong winds.

Is drip edge flashing necessary?

It helps direct rainwater off of the roof, either into a gutter or onto the ground. Without the flashing, rainwater could adhere to the edges of the roof and saturate important structural components. Drip edge flashing helps protect the roof decking, wood soffits, and wood trim from rot.

Should you use drip edge touch fascia?

A vertical drip edge lip extends down roughly 1 5/8″ and as Steve points out, should not be set tight against the fascia board or water may run behind the gutter and down the fascia, inviting leaks and rot.

What colors go with driftwood shingles?

Driftwood. The brown shingle colors below – Dual Brown, Earthtone Cedar and Beachwood – go great with homes that have beige, white, and/or cream-colored or brick siding. These brown asphalt shingles are meant to mimic the look of traditional cedar and wood shake roofing.

Should shingles overhang drip edge?

Yes. Shingles should not extend more than 3/4” (19 mm) past the drip edge. If shingles overhang the edge of the roof by more than 3/4” (19 mm), then they are not supported and may crack and break off. In addition, the wind resistance at the roof edge may be compromised.

Should gutters go behind drip edge?

It is recommended that gutters are placed under or ‘behind’ the drip edge of your roof. … If gutters are installed below the drip edge, water can drip behind the gutter and cause damage to the wood supporting the gutter system.

Do you install drip edge before fascia?

The correct placement of a roof drip edge is on top of the roof’s exterior cover directly between the sheathing and the fascia board, which forms a drainage gap between the drip edge and the fascia board. As a result, the drainage improves water flow and protects the roof from potential water damage.

Article first time published on

How do you paint galvanized drip edges?

1. Go over the metal with a wire brush to remove any oxidation.
2. Wipe the galvanized surface down with white vinegar. …
3. Prime the surface with a primer made for metal.
4. Apply two topcoats of paint on top of the primer.

Does tar paper go over or under drip edge?

The best way is to install the roof drip edge only along the eaves first, then place ice-and-water barrier (in the snowbelt) or felt paper (underlayment) over the drip edge.

Does drip edge go over or under felt?

Does Drip Edge Go Over or Under Felt? According to most building codes and manufacturer recommendations, the drip edge should be installed beneath the underlayment along the eaves of the roof.

Why is water dripping between gutter and fascia?

If water is dripping behind your gutter, it’s probably because it was installed without any flashing over the back of the gutter. The gutter apron will prevent the dripping. A gutter apron is a bent piece of flashing that tucks up under the shingles and over the gutter. Home centers sell a gutter apron in 10-ft.

How do I match a roof shingle color?

For example, if your home has a warm-colored roof in a shade such as brick red or rusty tan, pick siding in a similarly warm shade such as tan, beige or brown. For a roof with shingles in a cool color like black or slate gray, select a cool color of siding such as blue, gray or green.

Which roof shingle brand is best?

• Atlas – Pinnacle Pristine.
• GAF-Elk – Royal Sovereign.
• CertainTeed – XT 25.
• Atlas – StormMaster Slate.
• Tamko – Heritage.
• Owens Corning – Oakridge.
• Owens Corning – Duration.
• Owens Corning – Berkshire Collection.

What color is driftwood?

Driftwood Grey is a midtone, gray, cappuccino greige with a coconut fiber undertone. It is a perfect paint color for an elegant appearance. Pair it with deep blues and touches of gold.

Can you face nail drip edge?

Not really. The whole idea of attaching drip edge by nailing into the roof sheathing from above, is to avoid providing a pathway for water to reach the wood underneath. Face nailing with regular nails will work themselves lose and provide that path. There are times it can not be avoided.

How long does drip edge last?

The average fascia board should last 10-20 years with proper drip edge configuration. In this photo we see rotted fascia board with a piece of fascia wrap hanging off. Also the shingles are showing water damage on the edge. The water damage to the shingles is a sign the water is going under the shingles.

Why is water dripping from my fascia?

If the water is coming from a leak between the gutter and the fascia, it is very likely that this is a gutter problem and that the back of the gutter was not installed correctly.

What is the difference between gutter apron and drip edge?

A drip edge, which is installed along the eaves and roof edge, directs the water away from your fascia board and into the gutter. On the other hand, a gutter apron has the advantage of providing you with less maintenance over time. Gutter flashing or gutter apron serves the primary purpose of collecting all the water.

Should you remove the plastic strip on shingles?

The GAF shingle application instructions for our entire product line specifically state that that film does not need to be removed. Note: The film strips on the back of each shingle are to prevent sticking together of the shingles while in the bundle. Their removal is NOT required during application.

Does fascia go on before shingles?

If your roofers are replacing your fascia board as part of a full roof replacement, then they will install the new shingles before they address the fascia. There is no way to replace the fascia board without removing the gutters, as the gutters are mounted to the board.

Why does water leak from soffits behind gutters?

If the gutters are clogged, it’s possible that the water is overflowing the gutters and this is contributing to the leak. If the gutters look clear, run a hose and fill the gutters with water. Water should run out the downspout and away from the house without filling the gutter.

What paint will stick to galvanized metal?

Most acrylic coatings will adhere directly to cleaned galvanized metal. A weathered galvanized surface develops a layer of white rust, which must be removed to ensure good adhesion of the coating.

Do I need to prime galvanized metal before painting?

We recommend priming the surface before painting. … Many like to use acrylic latex paint, which is not designed for galvanized steel specifically, but can still work with a primer. However, paints that are made for galvanized steel do require less prep work and adhere better than other types of paint.

Does galvanized steel need to be painted?

The truth is that paint will not adhere to galvanized steel. The layer of zinc left on the metal after the galvanization process is meant to reduce corrosion, but it also rejects paint, eventually causing it to peel or shed.

How far do shingles overhang drip edge?

The edge of the shingles should hang over a roof between an inch and an inch and a half — or between a half inch and three-quarters of an inch if drip edge flashing is installed. Too much overhang and the shingles could blow off in high winds; too little can allow water to seep into rake or fascia boards.

Does ice and water go over drip edge?

(The drip edge will be installed over the ice and water protector and other underlayments at roof rake edges.) You should install ice and water protector before other underlayments, including roof felt. Around roof features like dormers and chimneys, you should place ice and water protector below flashing.

Can you replace drip edge without removing shingles?

The drip edge is often replaced when new shingles are installed, but it can be replaced at any time. Asphalt roof shingles can become brittle in cold weather, so wait until a warm (but not hot) day to remove and replace eave stripping.

Is it normal for water to drip from gutters?

Over time, rain gutters often start to pull away from the roof, allowing water to drip over the gutter sides or between the gutters and the walls. Usually, this is due to gutter fasteners rusting or loosening after years of temperature extremes and exposure to water.