What is the average cost per square foot to strip and wax floors

Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.

How do you calculate floor stripping?

1. Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot.
2. Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350)
3. Cost of pads, mops, etc. (

How much do you charge to buff a floor?

MethodCostHardwood floor cleaning$.50 – $.75 per square footBuffing$1.25 – $1.75 per square footCoating$.65 – $1.25 per square foot

How long does it take to strip and wax a floor?

Overall, when using a chemical stripping agent, the stripping process takes about fifteen minutes to sit before applying agitation to the floors. After the wax has been applied, it will cure overnight and can be used the next day.

How do you charge for stripping and waxing floors?

Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.

How often is it necessary to strip off the floor polish completely?

It depends on the amount of foot traffic in the facility, say distributors, as well as how that floor is maintained throughout the year. As a rule of thumb, floors are typically scrubbed and recoated every six months to a year, which can stretch out the stripping and recoating process by as much as four or five years.

How many square feet will 5 gallons of wax cover?

This 5-gallon container covers approximately 10,000 square feet (2,000 square feet per gallon). A 1-gallon container is also available from 1877FloorGuy for your convenience.

How much does it cost to refinish $1000 square feet of hardwood floors?

Flooring square footageAverage cost751 – 1000 sq. ft.$2,1001001 – 1500 sq. ft.$2,3501501 – 2000 sq. ft.$3,5002001 – 3000 sq. ft.$5,000

Do you buff floors after waxing?

Once the old wax is gone, apply a new coat with a rag; buff it with the floor buffer, and your floor will look as good as new.

How much does it cost to rent a buffer for hardwood floors?

Renting a buffing and stripping machine typically costs $35-$60 per day. The Home Depot’s tool rental division, for example, rents a floor buffer and polisher[5] for $36 per day.

Article first time published on

How much is a floor stripper?

In general, new floor strippers cost approximately $500 to $5,000. A high-powered electric stripper/burnisher that is able to handle 25,000 square feet per hour costs roughly $3,000 to $4,000.

How do you price floor cleaning?

1. Over 10,000 square feet: 25 cents per square foot.
2. 5,000-10,000 square feet: 39 cents per square foot.
3. Up to 5,000 square feet: 50 cents per square foot.

How do you figure price per square foot for cleaning?

The time it takes to clean an area is calculated by the total area divided by your productivity. Here’s a simple way to put this: Square foot (area) = length x width.

What does waxing a floor do?

Floor wax helps seal the porous wood surface, protects it from stains, hides scratches and dents and increases shine.

How much does it cost to wax a gym floor?

How much does gym floor refinishing cost? The average price for gym floor refinishing is between $2.00 and $3.00 per square foot, depending on the cost factors listed below.

Does vinegar remove floor polish?

Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine and leave a dull appearance.

What removes dirt that sticks or penetrates into the carpet area?

Carpet Extractor is a designated for dry foam shampooing of carpets. It removes dirt that sticks to or penetrates into the carpet layers.

How do you remove long life floor polish?

Apply our Long Life Cloudy Ammonia to strip back the polish, wait until floor is dry, and then re-apply the Long Life Self Shining Floor Polish. How do you remove this product from the floor if there are lots of layers? You remove it by using Long Life Cloudy Ammonia.

Can you use Pine Sol on waxed floors?

Pine-Sol is not recommended for unsealed or visibly worn floors or for oiled or waxed wood floors.

How do you mop a waxed floor?

Weekly dry-mop waxed with a microfiber cloth pad, or vacuum with a dust brush attachment, to keep dust at bay. Avoid wet-mopping large areas of the waxed hardwood floor with water; it can cloud the wax coat or damage the wood. Wipe up spills as soon as they occur with a water-dampened cloth, then wipe dry.

How do you mop a waxed tile floor?

Mopping should be done with cold water and a neutral cleaner. If hot water is used on a waxed VCT floor, it can cause the wax to come up with the mop and also gives the wax a cloudy appearance. Also, do not use harsh cleaners to mop a VCT floor. Bleach or ammonia based products will strip wax off of the VCT floor.

How do you remove mop and Glo from linoleum?

Mix two cups of ammonia in a gallon of warm water; then mop the solution over the floor or use a soft cloth to apply the liquid to the linoleum. Wait five minutes or so, and scrub the floor with a nylon scrub pad or scrub sponge. Mop the floor again with clean water afterwards.

Can you remove wax from vinyl floor?

Cleaning Procedure If the wax buildup isn’t extreme, you should be able to remove it using a sponge mop. … If the floor has several layers of wax, you may need to scrub with a brush and then mop up the residue. Be sure to clean the floor with clear water and let it dry thoroughly before rewaxing.

How do you remove old wax from vinyl flooring?

Mix 1 gallon of warm water, 1 cup of white vinegar and 1 cup of cream of tartar in a bucket. Dip a mop into the solution and apply it to the floor. Allow it to sit for a few minutes until the wax softens. Scrub the floor in a circular motion, using a scrub brush.

How much does it cost to refinish 1200 square feet of hardwood floors?

If your hardwood floors are dull, scratched, and looking old, it’s probably time to refinish them. According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor.

How much does it cost to refinish 1500 square feet of hardwood?

Room sizeSquare feetAverage costWhole house1,000$2,000 – $4,000Whole house1,500$2,800 – $6,000Whole house2,000$3,400 – $8,000

Is it cheaper to refinish or replace hardwood floors?

In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. … Even if you have this, it will still be less expensive then replacing the whole floor.

What dissolves floor wax?

Combine 2 gallons hot water, 2 cups household ammonia and 1 cup of powdered dishwasher soap (with no bleach), and apply to the floor to dissolve the wax quickly.

How can I refinish my hardwood floors without sanding?

The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.

What grit sandpaper do you use to sand hardwood floors?

Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.

How do you get rid of scratches on wooden floors?

A combo of baking soda and olive oil can help reduce and remove scratches from wood. Vacuum your floor thoroughly, then apply baking soda moistened with several drops of olive oil to marred areas. Wait five minutes, then buff in gently, using a soft sponge. Clean thoroughly with a damp cloth and dry with a towel.