What is Type F transmission fluid used for

It is formulated to help in the following areas: reduce clutch and brake fluid slippage, show high-oxidation resistance, provide excellent shear stability, and enforce dependable anti-wear and gear protection.

What is Type F transmission fluid equivalent?

This type of drive train fluid should not be used in automatics that require Type F. It can be replaced with Mercon or Mercon V specification.

Is Type F transmission fluid the same as ATF?

General Motors referred to its ATF as Dexron II and Ford’s specified fluid was labeled Mercon. Ford first produced its own ATF in 1967 and referred to as Type F. … This fluid was used in all Ford transmissions until 1977 and most Ford transmissions until 1980.

Can I use Type F instead of dexron?

As to ATF, no problem mixing Dexron and Type F, one can actually fine tune shift harshness as Type F is in fact “grippier”.

Is ATF Type F synthetic?

Lucas Semi-Synthetic Type F Automatic Transmission Fluid is blended from premium paraffinic and synthetic base oils (Groups II+ and Ill), with shear stable synthetic polymers and viscosity modifiers, combined with a high-quality additive package that includes anti-wear, anti-oxidants and corrosion inhibitors.

What viscosity is Type F transmission fluid?

Specific Gravity @ 60°F0.864Viscosity, KinematiccSt @ 40°C43cSt @ 100°C7.6Viscosity Index146

Can you put Type F transmission fluid?

RAY: If you put Dexron, Mercon or Chrysler 7176 transmission fluid in just about any transmission, it will perform just fine. … And in transmissions that are not designed for it, Type F fluid will cause rough shifts, and can even cause damage by making the torque converter engage before it should.

Is dexron 3 compatible with Type F?

Yes. A newer (in the last 40 years) rebuild of a C4 means it can use Dexron and work just fine. Some people like to use Type just because the antique service manuals say to. Some folks use Dexron and then a single quart of Type F for the additives.

Can you use Type F transmission fluid in a Chevy?

Type “F” fluid is a heaver viscosity. Stands more heat also. Just the installation of type “F” fluid will have a firmer shift. You can not use it in a any of the GM overdrive transmissions.

Can you mix Mercon with Type F transmission fluid?

It’s generally held that a quart or two of F and the rest of a C4 filled with Mercon works fine.

Article first time published on

What is the difference between Type F and dexron transmission fluid?

What is the difference between DEXRON® III/MERCON® and type F transmission fluid? The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package.

What replaces ATF Type A?

The “Type A, Suffix A” specification replaced Type “A” in the late 1950’s. Dexron “B” fluid later replaced Type A, Suffix A. All iterations of Dexron B, Dexron II and Dexron III ATF products are backward compatible with Type A and Type A , Suffix A fluids.

Does it matter what type of transmission fluid I use?

Some transmission fluids are very incompatible with different transmission types as they use different additives in the fluids. Your car transmission needs the correct fluid, as specified by your car manufacturer, to run correctly and to the fullest length of life.

What is Type F hydraulic fluid?

Mobil Type F ATF is an automatic transmission fluid which is made from high quality base oils with viscosity index improvers, antioxidants, anti-wear agents, defoamants and special additives to provide the controlled frictional characteristics of a Type F fluid in automatic transmission applications.

What kind of transmission fluid does Ford use?

Dexron III/Mercon – This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports.

What kind of transmission fluid does a C4 use?

Fluid Servicing Facts Always use Type F in a C4 transmission (as long as you can find it) and stick with one brand. If you cannot find Type F, go with Mercon V, a synthetic automatic transmission fluid designed to work with all types of automatics and fluids.

Can I use dexron 3 instead of ATF 4?

Fina’s product data sheet for its “Dexron-III/Mercon ATF” says it is recommended for “all late model GM…Chrysler and most imported car…automatic transmissions, as well as, (sic) those in Ford vehicles that call for a Mercon fluid.” But, again, a fluid compatible with Dexron III or Mercon is not going to be …

What is the fluid capacity of a TH350 transmission?

Transmission Fluid CapacityTransmission (w/ Stock Pan)# of QuartsGM TH3504GM TH4006GM Powerglide4

How much transmission fluid does a TH350 take?

If your servicing the transmission in the car. And only drop the pan it will take 4.5-5.5 quarts.

Can you mix two types of transmission fluid?

No, we can’t mix different transmission fluids. Because each transmission fluid has different characteristics. Different transmission fluids are prepared considering various factors.

What kind of transmission fluid does a TH400 take?

It might appear that Dexron VI would therefore be backwards compatible as far back as the older TH350 and TH400 transmissions. The reality is that Dex VI is best only for newer vehicles.

Can you mix dexron 3 and dexron 6?

Dex 6 is fine to mix with Dex 3. Just do filter and replaced drained fluid. Dont forget to clean off magnet and put back.

Can you mix dexron 2 and 3?

Yes, you can mix them together, as long as you peel one of the “I”s off of the Dextron III bottle before pouring it in…on second thought…you probably don’t even need to do that. They can be safely mixed.

What weight oil is automatic transmission fluid?

Automatic Transmission Transmission Fluid is essentially thin hydraulic oil. In order to effectively lubricate the delicate parts of the system, the viscosity of the oil is kept low – generally around 0W/5 or 5W/10.

Why is transmission fluid red?

Why Is Transmission Fluid Red? The red color for transmission fluid boils down to the applied dye at the point of manufacture. The reason is unknown but serves as a clue separating the fluid type from engine oil, radiator oil, washer fluid, and coolant.

Is transmission fluid a petroleum product?

While traditional transmission fluid is made from crude oil and the reshaping of hydrocarbons for specifications of different vehicles, synthetic transmission fluid is created through different chemical reactions. This type of transmission oil is less likely to break down, oxidize or thin out in high temperatures.

Should you use OEM transmission fluid?

The only time to use a Genuine fluid is if it’s still under warranty and you don’t have to pay for it. … These are exact same as Genuine fluid but are a much better value. If your car is more than 3 or 4 years old select an OEM part when the repair is not covered under warranty and you have to pay for it yourself.

Can I use any transmission fluid in my car?

Yes, even a manual needs transmission fluid. The type of fluid can vary from car to car, however. Some manuals require conventional engine oil, and others function best with automatic transmission fluid. So make sure you’re putting in the fluid that’s specified for your car.

Can I use CVT in ATF?

You cannot use any type of CVT fluid in a automatic transmission that requires ATF Transmission fluid. CVT transmission operates with a chain or belt and is very different in design versus a automatic transmission.