Which is better 10w 30 or 10w 40

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

Can I use 10W-40 instead of 10W30?

Similarly, SAE 10W-40 motor oil performs well in cold weather conditions. It has the same low-temperature limits as the 10W-30 but is better in higher temperatures. … Either 10W30 or 10W40 for summer use is fine; however, 10W-40 motor oil will better protect your engine.

Is 10W40 good for high mileage?

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils†), including: Cars.

Which is more fuel efficient 10W30 or 10W40 engine oil?

10w30 would be but not by much. Just use what the vehicle manufacturer recommends. Technically, a lighter weight oil will provide better gas mileage as it’s lower viscosity makes it easier to move through the oil system. However, the difference between 10W30 and 10W40 will be indistinguishable.

What is 10W40 oil used for?

Higher viscosity oil such as a 10W-40 can be useful for older engines burning or leaking oil. We offer Mobil™ 10W-40 high viscosity motor oils for use in vehicles with more than 75,000 miles, and a synthetic blend oil when cost is a consideration.

Which is better 5W40 or 10W40?

The 5W40 is thinner than the 10W40 at lower temperatures. But when the temperature is higher, both motor oils similarly perform their intended functions (using the same viscosity). … However, the main difference between these two engine types is that the 5W40 can work better than 10W40 in very cold places.

Is 10W-40 oil good?

The synthetic 10W-40 flows easily and still maintains enough viscosity to protect piston skirts and bearings when it gets hot. The improved temperature stability of synthetics makes them a better choice for race engines and serious high-performance engines.

Is 10W30 good for summer?

As a general rule, you’ll get the best protection in the summer when you use a slightly thicker grade of oil, such as a 10W30 instead of a 5W30. Engines need a thicker oil in the summer months because of the summer heat and its effects on thinning the oil out.

Can I mix 10W40 with 10W30?

yes you can mix 10W30 with 10W40 as long as the engine will work with both 10W30 and 10W40. In certain high performance engines the 40 could be too thick in certain engines. Most of todays engines use much lighter oils to save on fuel economy and due to engine specifications.

Is Thicker oil better for older engines?

Newer vehicles can utilize thinner oils for faster lubrication of new engine parts. In contrast, older, high-mileage engines benefit from thicker oils to prevent friction and oil loss.

Article first time published on

Is 10W40 better for older cars?

Applications of 10W-40 Motor Oil Drivers commonly use 10W-40 motor oil in vehicles with higher mileage because the oil is thicker while the engine is hot; this helps lubricate older moving parts. This oil is meant to start up vehicles in winter climates that experience temperatures of 10 degrees Celsius.

What is the difference between 0W 40 and 10W-40?

And – “Remember, the only difference between a 0W-40 and a 10W-40 is that the 0W-40 thickens less after you turn off your engine. It is still too thick in the morning at startup but not as thick as the 10W-40.” The significance of this statement is that even a “0” wt oil is too thick for cold startup.

What motorcycle oil is best?

If you are looking for a mineral-based oil, we recommend the Yamalube All Purpose SAE 10W-40 Oil. The Lucas SAE 10W-40 Semi-Synthetic Motorcycle Oil is a good semi-synthetic blend, while the Red Line 42504 20W-50 Fully Synthetic Motorcycle Oil is a decent choice for a fully synthetic option.

Is 10W-40 engine oil Synthetic?

1. Is 10W-40 Oil Synthetic? Like most multigrade motor oils, 10W-40 oil can be synthetic oil, semi synthetic oil, or conventional motor oil. There’s also a high-mileage variation.

Is 10W40 a synthetic oil?

Semi-synthetic oils such as 10W40 have long been the standard. Their base is refined crude oil, which is then blended with additives.

Can I use 5w40 instead of 10W40?

No, you can use 5w-40 anywhere a 10w-40 is recommended. At operating temperatures, both oils are 40wt and are equivalent. What matters most is the operating temp viscosity (the 2nd number). The first number (with a “w”) only applies to colder oil viscosity.

What is 10W 30 oil used for?

10w30 protects parts of the engine from rust. This oil will increase the life of your engine. It gives the user noiseless and smooth gear and clutch operations. This engine oil will maintain its viscosity even under high temperatures.

What oil is better for hot weather?

IMAGEPRODUCTEDITOR’S RATINGShell Rotella T5 10W-30 Diesel Engine Oil9.5Castrol 06246 Edge Full Synthetic Motor Oil9.1BEST BUDGETValvoline High Mileage Oil With MaxLife Technology8.8Mobil 1 120762 Synthetic Motor Oil8.6

Is 10W-40 OK for my car?

Recommended Services The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

When should I use 5w40 oil?

5w40 is better for starting your engine at low temperatures as it flows more easily in this environment. When the engine is running and hot, the differences are negligible; 5w40 and 10w40 both have high viscosities and are equally effective in protecting against engine wear.

Is 10W 30 thicker than 5W 40?

In the main, 10W-40 has higher viscosity than 5W-30 across the entire temperature range. It’s thicker, heavier.

Will thicker oil damage my engine?

Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.

Is 10W 30 oil the same as SAE 30?

SAE 10w30 oil has 10w thickness at low temperatures, but SAE 30 is at high temperatures. … In the straight SAE, 30 doesn’t and can have immense Viscosity and helpless pumpability at low temperatures. As SAE 10w30 is not thick in low temperature, while SAE 30 is in high temperature.

What oil is heavier than 10W30?

The quick answer is 10W40 is a thicker engine oil than 10W30 at higher temperatures. Both have almost the same characteristics, and the only difference is the oil viscosity.

What is the difference between 10W 30 and 20w 40?

20w 40 is a thicker oil when compared to the original 10w 30 oil. So 10w 30 oil is going to flow better than 20w40 oil when you initially start it and also run it. If the oil flows better the better the oil will lubricate and protect engine parts.

Can I use 10W40 instead of 5w30 in summer?

One must use the oil specified by the manufacturer. If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Is 10W 30 thicker than 5W 30?

So both the oils 5W–30 and 10W–30 have exactly the same viscosity (SAE 30) when your engine is running, and will perform in the same way. However, the 10W–30 oil will be thicker (higher viscosity) than the 5W–30 when it is cool.

When should I use heavier oil?

The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well. As long as you’re not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.

Which is better 10W40 or 20w50?

The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

Is higher viscosity oil better?

Thin, low viscosity oils flow easier to protect engine parts at cold temperature. Thick, high viscosity oils are typically better at maintaining film strength to protect engines at high temperatures.

What does 0W 30 mean?

It actually stands for Winter. That’s because 0W-30 engine oil is formulated to flow like a 0 Weight oil in cold conditions, yet offer the protection of a 30 Weight motor oil when the engine reaches its full operating temperature.