How do you sew a casing around a waistband

The casing is the “tunnel” that holds elastic in the sewn garment, whereas cut-on waistbands are folded down and topstitched from the right side. … You can also forgo the top stitching and stitch the elastic directly to the edge of your pants, then turn it inside and secure it in the side seams for an invisible look.

What is a casing waistband?

The casing is the “tunnel” that holds elastic in the sewn garment, whereas cut-on waistbands are folded down and topstitched from the right side. … You can also forgo the top stitching and stitch the elastic directly to the edge of your pants, then turn it inside and secure it in the side seams for an invisible look.

Do I need bias tape?

Bias tape is perfect for a decorative finish on a curved edge because the bias will bend and ease around the curve. A straight-grain strip will not curve without kinks and warping. Bias is used in many quilting techniques and sewing projects.

What is a casing stitch?

A casing is a folded over edge of fabric or an application that is applied separately to the garment. The end result is used to enclose a drawstring tie or elastic. Casings can be used at the waist, ankle or wrist when constructing clothing, or at the opening of a bag or purse.

How do you sew elastic to fabric directly?

1. Measure and pin to divide your fabric into quarter sections. Mark your elastic into quarters in the same way.
2. Pin the end of your elastic to the end of your fabric and stitch to secure. Pull the elastic tightly and pin the next section of elastic to the next pin on the fabric.

What is the difference between drawcord and drawstring?

As nouns the difference between drawstring and drawcord is that drawstring is a string or cord, encased in a fabric tube, with one or more small openings into the tube, on a bag or garment, allowing the item to be closed (as with a bag) or tightened (as with sweatpants or a bathing suit) while drawcord is drawstring.

How wide should elastic be for a finished casing?

Whatever width of elastic you choose to work with, the casing you’ll create should be at least ¼” (6 mm) wider. Stretch out your elastic a few times before making the final cut, this will prevent your elastic from becoming loose over time.

What are the two basic types of casing?

• Conductor Casing.
• Surface Casing.
• Intermediate Casing.
• Production Casing.
• Liner.
• Liner tieback casing.

What is drawstring elastic waistband?

A drawstring elastic waistband combines the adjustability of a drawstring with the stretchy of elastic. It’s a nice detail to add when sewing athletic or leisure wear! … She uses her Skye Joggers pattern, but any pants pattern with a separate waistband casing will work.

What is applied casing?

An applied casing is formed by stitching a separate strip of fabric to the area to be drawn up. If sewn outside the garment, the casing may be made of either the garment fabric or a contrasting trim.

Article first time published on

What is a casing and how do you make one?

A casing is a hollow channel that holds elastic. It’s a quick way to cinch in and finish a skirt, shorts, or pant top without making a separate waistband. Fold over fabric top 1/4″ and press. Omit this step with knits-they don’t ravel!

How do you make a waist drawstring?

1. Decide on the width and length of your future drawstring. Here we will be making a 1/2″-wide drawstring. …
2. Fold raw edges in 3/8” (1 cm) on each end (short sides) to the wrong side. Then fold in half length-wise and press.
3. Fold raw edges in towards centerfold. …
4. Edgestitch along open edges to finish.

What is a baste stitch?

A basting stitch – an overlong straight stitch with unfinished ends – is often used in quilting or embroidery to temporarily hold sandwiched pieces of fabric in place, with the basting stitches removed when the piece is finished.

What is the difference between bias tape and binding?

Bias tape is a strip of fabric (or multiple strips sewn together) cut on the bias. Bias binding is when bias tape is used to enclose the raw edge of a neckline, armhole, or hem. In this case, the bias tape fabric is seen. It can be made of contrasting or matching fabric..

What fabric is best for bias tape?

The best fabrics for making bias tape Lightweight silks, cotton batiste, cotton voiles, cotton quilting fabrics, shirtings, cotton chambrays all make excellent bias. But you can be a little adventurous as long as the fabric is lightweight.