What is 15 lb felt paper

Roofing felt is similar to fleece made from polyester or fiberglass and then soaked in waterproofing agent. 15 pound and 30 pound refers to the thickness of the felt, with the numbers indicating the weight of 100 square feet of this paper back when they were originally developed.

What is the difference between 15 pound roofing felt and 30 pound felt?

While #15 is a good option for most roofing jobs, #30 provides more protection and performance for steep roofs and flat roofs. … But if your roof has a steep pitch, #30 is a better option because it is thicker and tears less during installation. With #30 you get a thicker layer of underlayment and protection.

What is another name for felt paper?

Roofing felt or felt paper, also called underlayment or roofing tar paper, goes between the roof deck and the shingles, which adds another layer of protection to your roof. Underlayment has a base made from natural materials like wood cellulose, or synthetics like fiberglass/polyester.

What is 15lbs felt?

Some customers prefer 30-lb felt paper because it is a thicker product, less likely to tear, and should wear better over time. In addition, on steeper roof slopes 30-lb felt paper is necessary for the slip protection of the installer, and it is also less likely to tear during installation of the shingles.

Why do they call it 30 pound felt paper?

The most common product is #15 felt. Before the oil crisis, felt weighed about 15 pounds per square (one square = 100 square feet), hence the asphalt-impregnated felt was called “15#” and “15-pound felt”. … Thirty-pound (30#) felt is now #30 felt and usually weighs 16 to 27 pounds per square.

How many square feet does 15 lb felt cover?

4 sq. ASTM Type 15 Felt Roll.

Is 15 pound felt waterproof?

Is Roofing Felt Waterproof? Roofing Felt is the support material that is required to develop roll roofing and roof shingles. Being used as the waterproof coverings in commercial as well as residential roofs for decades, these membranes comprise two layers, signifying it is waterproof.

Is felt paper slippery?

Synthetic Felt has more traction than Tar Paper, even when wet. Tar Paper has an oily surface that makes it more slippery. … There is nothing worse than slipping on a roof because the Tar Paper broke beneath your feet. The last difference I want to point out is the cost difference between the two.

What is 30 felt paper?

#30 asphalt felt underlayment provides an extra layer of protection between your shingles and your roof deck. This underlayment features excellent asphalt saturation for effective waterproofing.

How many rolls of felt make a square?

Rolls of felt coverage for roofs is sold in rolls that are one square each. One roofing square equals to 100 square feet. Always double check with the roofing calculator to make sure that you have enough felt to cover the entire area of the roof.

Article first time published on

How much is a roll of felt paper?

Roofing Felt Paper costsZip CodeSq. ft.BasicBetterRoofing Felt Paper – Material Prices$165.00 – $175.00$190.00 – $210.00Roofing Felt Paper – Installation Cost$220.00 – $240.00$265.00 – $280.00Roofing Felt Paper – Total$385.00 – $415.00$455.00 – $490.00

Is felt paper necessary for shingles?

Felt, otherwise known as underpayment, is required when asphalt shingles are installed as a first layer of roofing or when they are applied over wood shingles or a built-up roof. … In these instances, the felt beneath the older shingles is regarded as adequate.

Does roofing felt keep water out?

The felt can get wet. However, due to its water repellent properties, it acts more as a shield than a sponge. The felt collects and then repels the water, allowing the roof to breathe. Felt will often get wet with a Cedar shake roof since this type of roof is designed to soak up then shed water.

Do roofers still use tar paper?

Prospectors during the California gold rush covered the roofs of their temporary shacks with roofing felt, also known as felt paper or tar paper. Fast forward 170 years and roofing felt is still the most popular roofing material (now used as an underlayment) being installed today.

Is roof underlayment necessary?

Whether or not underlayment is required, it’s always a good idea because it provides the roof deck an extra layer of defense against damage. … Without underlayment, this rain will soak into the roof deck and cause problems ranging from mold and rot to leaks within the home’s interior.

Is synthetic underlayment better than felt?

For enhanced water-resistance and protection from the elements, many roofers are choosing to go the route of synthetic roofing underlayment. … This type of underlayment is typically moisture-resistant, and when it’s installed correctly, it offers better protection from the weather compared to felt.

Which side of felt paper goes down?

Direction. When laying sheets of tar paper, always lay the sticky, glossy side down. Tar paper’s two sides are noticeably different. One side is somewhat sticky, though don’t expect it to leave a glue-like residue on your hands.

Is it OK to put tar paper on a wet roof?

Do not shingle over wet or damp roof sheathing or damp felt paper. The trapped moisture cannot evaporate when the sun heats the shingle. … Do not use caulking, roof tar or asphalt mixes to cover flashing materials.

How much felt paper do I need?

How Many Rolls of Felt Will You Need. Roofing felt is sold by the roll. The average roll of 15-pound roofing felt covers about 400 ft2, or 4 squares, while the average roll of 30-pound roofing felt covers about 200 ft2, or 2 squares. Rolls of felt are 36″ wide x 144′ long for 15# and 72′ long for 30#.

How long is a roll of roofing felt?

When purchasing shed felt, a single roll that is 8m x 1m should be more than sufficient for your needs.

How much does a roll of 30 lb felt weight?

By shifting the pound symbol, 15# felt became #15 felt, which may actually weigh 7.5 to 12.5 pounds per square; #30 felt can weigh between 16 and 27 pounds per square.

How much do you overlap felt paper?

Roofing felt is required to overlap 2 inches over the lower felt course. The overlapping felt creates a secondary barrier for moisture and wicks water away from the shingles above and the sheathing below. Therefore, a 2-inch overlap provides redundancy at the edges where the barrier is weakest.

What felt is best for roofing?

• Our Pick. Chesterfelt Green Mineral Premium Grade Shed Felt.
• Best Alternative. IKO Shed Felt.
• Felt Shingles Roofing Tiles.
• Ashbrook Roofing Super Grade Polyester Reinforced Shed.
• Rose Roofing Green Heavy Duty Shed Roofing Felt.

How long can felt paper be exposed?

All of this means that asphalt felt should only be used when the roof will be covered in the same day. Synthetic underlayment, on the other hand, is resistant to moisture and extreme temperatures. In addition, it typically resists UV damage for between six to 12 months.

What is the cheapest way to roof a shed?

In most cases, MSR roll roofing is the cheapest shed roof material you can buy. Roll roofing is also the easiest shed roof to install because you can cover large areas quickly by simply rolling it out and nailing it down.

How much should roofing felt overlap?

Always ensure there is at least 5cm of overlap between each sheet, and nail down the felt from the centre outwards as before.

What is synthetic felt paper?

Synthetic underlayment is much more tear-resistant when exposed to high winds and foot traffic than asphalt felt underlayment. Since synthetics do not absorb moisture, they are resistant to fungal growth and are wrinkle-free. Synthetic underlayments are ultraviolet (UV) resistant for between six and twelve months.

How many sq ft are in a bundle of shingles?

You usually purchase shingles by the bundle. Standard shingles are 12 by 36 inches and come 29 to a package. Most shingles come 3 bundles to a square — which is equal to 100 square feet. So, each bundle provides about 33 square feet of coverage.

How is roofing felt sold?

Roofing felt is sold in rolls and the product label will give information on the area contained. Divide the area of your roof by the area of the felt rolls you plan to use, and allow an approximate 10% extra for waste.

Is tar paper better than Tyvek?

Tyvek offers more permeability but less longevity, and you find it near the exterior siding. Tar paper withstands high moisture levels, but it can crack in freezing temperatures. That’s why you usually find it on the interior walls.

Can you use roofing felt under hardwood flooring?

Roofing paper should not be used under hardwood flooring. Due to its bituminous materials, it could begin to exude an unpleasant odor and even be toxic for your family. Instead, rosin or felt underlayment paper is appropriate.