When using the pass technique with a fire extinguisher How far should you stand from the flames

You should stay between six and eight feet away from the flames as you prepare to operate the fire extinguisher.

When using a fire extinguisher you should stand how far from it?

Aim low. Standing up to 10 feet away from the fire. Point the extinguisher discharge horn at the front edge of the base of the fire (the lowest point of the fire nearest you). Remember – extinguishers are designed to be operated in an upright position.

What is the pass technique for fire extinguisher use?

It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher.

What is the advised distance to use a fire extinguisher from in feet?

What is the advised distance to use a fire extinguisher from? Officially, it is between 8 and 12 feet if possible.

How far away should you stand when you are using a fire extinguisher to put out a fire 4 feet 6 feet 8 feet 10 feet?

#4 – How far away should you stand when you are using a fire extinguisher to put out a fire? The correct answer is C, 8 feet. According to FEMA (Federal Emergency Management Agency), it’s recommended that you stand 8 feet away when extinguishing a fire.

How do you close a fire extinguisher after use?

1. Pull: Pull the pin, this will break the tamper seal.
2. Aim: Aim low, pointing the nozzle or hose at the base of the fire. …
3. Squeeze: Squeeze the handle to release the extinguishing agent.
4. Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

How do you use a fire extinguisher explain pass method with the help of diagram?

1. Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism.
2. Aim low. Point the extinguisher at the base of the fire.
3. Squeeze the lever slowly and evenly.
4. Sweep the nozzle from side-to-side.

How do you close a fire extinguisher?

A: Aim the extinguisher nozzle on the hose low, toward the base of the fire. S: Squeeze the handle or lever to discharge the extinguisher. S: Sweep the nozzle back and forth. Keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished.

What is the advised distance to use a fire extinguisher from UK?

The 30-metre rule comes from current UK British Standards (BS 5306) and states that you should be no more than 30 metres from the appropriate extinguisher on any given level of your premises.

What is pass technique?

Always Remember the word PASS .Pass Means To pull the pin, Aim the Holes to the fire, Squeeze the handle and sweep the floor of the fire. Last make sure There is an exit for your safety.

Article first time published on

Which two steps are part of the PASS method?

• Aim: Aim the nozzle of the fire extinguisher low at the base of the fire.
• Squeeze: Squeeze the trigger you just pulled the pin out of. Remember to squeeze it slowly and evenly, so it is as effective as possible.
• Swipe: Swipe from side to side to cover all areas the fire may have spread to.

What is the pass process?

method when using a fire extinguisher. P.A.S.S. stands for pull, aim, squeeze, and sweep. … The P.A.S.S method is an easy tool to remember how you should use a fire extinguisher in case of an emergency.

When using a fire extinguisher the first step in pass is?

Discharge the extinguisher within its effective range using the P.A.S.S. technique (pull, aim, squeeze, sweep). Back away from an extinguished fire in case it flames up again. Evacuate immediately if the extinguisher is empty and the fire is not out.

How do you use a fire extinguisher quizlet?

Squeeze the handle to discharge the extinguisher. Sweep the extinguisher from side to side at the base of the fire.

When would you use a fire extinguisher in the workplace?

A fire extinguisher is only designed to handle smaller fires in the workplace or to protect evacuation routes in the event of a bigger one.

How far away should you be from a fire extinguisher?

For each type of hazard, extinguishers with lower minimum ratings must be placed no more than 30 feet away, while extinguishers with higher minimum ratings may be as far as 50 feet away.

When would it be appropriate to smother a fire with a fire blanket?

Fire blankets are only suitable when the fire is small, or Class F fires. These are especially helpful for Class F fires. These fires are typically caused by cooking fat oils. These types of fires should not be doused with water and you should use a fire blanket to put it out.

How often should fire extinguishers be inspected UK?

How often do fire extinguishers need servicing? A fire extinguisher needs to be serviced by a professional every 12 months. A competent person also needs to visually inspect fire extinguishers monthly, to check there are no faults.

What are four step of a pass method?

1. Pull the pin while holding the extinguisher away from you to unlock the mechanism.
2. Aim low toward the base of the fire.
3. Squeeze the lever slowly.
4. Sweep the nozzle from side to side at the base of the fire.

What is pass in fire service?

P.A.S.S. stands for: Pull, Aim, Squeeze, Sweep.

How does a fire extinguisher work class 8?

The job of a fire extinguisher is to cut off the supply of air or bring down the temperature of the fuel. Fig. 9 Follow PASS. Soda – acid fire extinguisher: Carbon dioxide liberated by the reaction of sulphuric acid with sodium bicarbonate solution comes out with a stream of liquid water at high pressure.

When using a fire extinguisher work slowly and methodically to ensure that the fire is out?

Aim at the base of the fire, not the flames. This is important – in order to put out the fire, you must extinguish the fuel. Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher.

When should you use a fire extinguisher quizlet?

D. Fire extinguishers are only effective against small fires. When using a fire extinguisher, you should remember P.A.S.S.

When using a fire extinguisher you should aim at quizlet?

“When using a fire extinguisher, I should sweep the nozzel from side-to-side while squeezing the handle and aiming at the base of the fire.”

When using a fire extinguisher to put out a fire you should sweep at the ___ of the fire?

Sweep the nozzle from side to side as you approach the fire, directing the extinguishing agent at the base of the flames. After an A Class fire is extinguished, probe for smouldering hot spots that could reignite the fuel.